The SLAM Method: Shock Level and Maintain (Pool Algae Cure)

Quick answer

SLAM = Shock Level And Maintain. Raise free chlorine to shock level — about 40% of your CYA — then hold it there, testing and topping up 2–3 times a day, until three things are true: the water is clear, overnight FC loss is 1 ppm or less, and CC is 0.5 ppm or less. Think days, not hours. And use liquid chlorine — it’s the cleanest shock for this job.

SLAM is the method behind most of those "my green pool is finally blue" forum success stories. It’s not a product — it’s a discipline: the right chlorine level, held relentlessly, until the water proves it’s done. Every part of it is simple except the patience.

The SLAM Method: Shock Level and Maintain (Pool Algae Cure)

Pool chemical dose calculator

Add this much Liquid chlorine 12.5%:
0.36 gal (6 cups)
Pool-store liquid chlorine. 1 gal in 10,000 gal raises FC about 12.5 ppm.

Estimate from standard pool-industry dosing ratios. Add two-thirds, retest after circulation, then top up. Never mix chlorine products together. Your product label has the final say.

Before you start

Test and write down your CYA — shock level is 40% of it. Get pH to 7.2–7.5 first (pH tests read falsely high above 10 ppm FC, so set it now while you still can). Clean the filter. Brush every surface — algae hides in a biofilm that chlorine penetrates slowly, and brushing exposes it. And stock enough liquid chlorine for several days, because running out mid-SLAM is how people quit.

If CYA is over 90, do yourself a favor and partially drain first — the shock level gets impractical above that.

The process

Dose liquid chlorine up to shock level (the shock calculator does the math). Test FC 2–3 times a day; every time it’s dropped, add chlorine back up to shock level. Brush daily. Run the pump 24/7. Backwash or clean the filter when the pressure rises.

You’ll watch the water go green → teal → cloudy blue → clear. That cloudiness near the end is dead algae your filter is hauling out — keep the filter clean and let it work.

The process

How you know you are done (all three)

1) The water is clear — you can see the deep-end drain distinctly. 2) Overnight chlorine loss is 1 ppm or less (test after sundown, test before sunrise, no additions in between). 3) Combined chlorine is 0.5 ppm or less. All three — no partial credit. Two out of three means keep going, because quitting early is exactly how pools go green again a week later.

Then let FC drift back down to normal range and go back to maintenance. And don’t swim at shock level — the pool can wait.

SLAM essentials
  • Shock level ≈ 40% of CYA (ppm FC).
  • Test + top up 2–3x daily. Pump 24/7. Brush daily.
  • Done when: clear water + overnight loss ≤1 ppm + CC ≤0.5.
  • Use liquid chlorine — no calcium/CYA baggage across many doses.
Safety warning. Never mix different chlorine products together, and never mix chlorine with acid. Wear gloves and eye protection, add chemicals to water (never water to chemicals), and follow the exact instructions on your product label — the label overrides any calculator. Store chemicals dry, separate, and away from kids and pets.
Common questions about the slam method: shock level and maintain (pool algae cure)

Common questions

How long does SLAM take?
Usually 3–7 days for a green pool; longer for black algae or high CYA. The water tells you when it’s done, not the calendar.
Can I swim during SLAM?
No. Stay out until FC is back in normal range and all three completion criteria are met.
Do I run the pump during SLAM?
Yes — 24/7. Circulation is what carries chlorine to every corner and drags dead algae to the filter.
How much chlorine does it take to SLAM a pool?
Shock level is about 40% of your CYA — so at CYA 40, that’s roughly 16 ppm FC. Total chlorine used depends on how bad the algae is; a green pool typically takes several gallons of liquid chlorine over a few days. The shock calculator does the per-dose math.
Is there a SLAM chart for chlorine levels by CYA?
The rule is simple enough to skip the chart: shock level is about 40% of CYA (around 60% for mustard algae). CYA 30 → 12 ppm, CYA 50 → 20 ppm, CYA 80 → 32 ppm. If CYA is over 90, drain first — the numbers get impractical.

Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.