Pool Shock Calculator: How Much Shock for Your Pool

Quick answer

Here's the number that matters: shock level is about 40% of your CYA — so CYA 40 means shocking to roughly 16 ppm FC. Enter your gallons above, set your current FC and your shock-level target, and you'll get the exact dose. Reach for liquid chlorine for shocking: cal-hypo sneaks calcium into your water, and dichlor sneaks in CYA.

Most 'how much shock should I use' advice fails for one reason: it ignores CYA. A bag that shocks a CYA-30 pool will barely ripple a CYA-80 pool. Shock level is a function of stabilizer. Always. No exceptions, no vibes-based dosing.

This calculator takes your gallons and your target — the shock level for your CYA — and does the math. For the full method, including how long you actually have to hold shock level, read fixing a green pool or the SLAM method.

Pool Shock Calculator: How Much Shock for Your Pool

Pool chemical dose calculator

Add this much Liquid chlorine 12.5%:
0.36 gal (6 cups)
Pool-store liquid chlorine. 1 gal in 10,000 gal raises FC about 12.5 ppm.

Estimate from standard pool-industry dosing ratios. Add two-thirds, retest after circulation, then top up. Never mix chlorine products together. Your product label has the final say.

What "shock level" actually means

Shock level runs about 40% of your CYA in ppm. CYA 30 → ~12 ppm FC. CYA 50 → ~20 ppm. CYA 80 → ~32 ppm. That last number is why high-CYA pools are miserable to shock — if your CYA is over 90, do yourself a favor and consider a partial drain before you start buying shock by the case.

Set the calculator's target to your shock level and the current to whatever you just measured. The dose gets you to shock level — but holding it there, testing 2–3 times a day and topping up, is what actually clears the pool. Reaching shock level is the easy part.

Which shock to use

My default is liquid chlorine (10–12.5%): no calcium, no CYA, dissolves instantly — it just does the job and leaves. Cal-hypo is fine when your calcium hardness is low, but every dose adds calcium, so it's risky if your CH is already sitting at 400+. Dichlor adds CYA (about 9 ppm per 10 ppm of FC), which is the exact opposite of what you want during a long shock process.

Want the full side-by-side? cal-hypo vs dichlor.

Which shock to use

After you reach shock level

One dose is the starting gun, not the treatment. Test morning and evening, top back up to shock level every time it dips, brush daily, and run the pump 24/7. You're done when three things are true: the water's clear, overnight FC loss is 1 ppm or less, and combined chlorine is 0.5 or less.

Shock level quick table (FC ppm)
  • CYA 30 → shock ~12 ppm
  • CYA 40 → shock ~16 ppm
  • CYA 50 → shock ~20 ppm
  • CYA 60 → shock ~24 ppm
  • CYA 80 → shock ~32 ppm
Safety warning. Never mix different chlorine products together, and never mix chlorine with acid. Wear gloves and eye protection, add chemicals to water (never water to chemicals), and follow the exact instructions on your product label — the label overrides any calculator. Store chemicals dry, separate, and away from kids and pets.
Common questions about pool shock calculator: how much shock for your pool

Common questions

How much shock for a 20,000 gallon pool?
At CYA 40 — shock level ~16 ppm — going from 2 ppm FC takes roughly 2.2 gallons of 12.5% liquid chlorine. But your CYA moves this number a lot, so run your own numbers through the calculator.
Can you over-shock a pool?
Yes. Extremely high chlorine can bleach liners and chew on equipment — which is exactly why you dose to a calculated shock level instead of dumping bags in blind and hoping.
How long after shock can you swim?
When FC has dropped back to your normal range (under ~5 ppm) and the water's clear. While it's sitting at shock level, stay out — that's not swimming water.
How many pounds of shock for a 30,000 gallon pool?
With 65% cal-hypo: about 1 lb per 10,000 gallons raises FC ~7.8 ppm, so a 14 ppm shock rise in 30,000 gallons takes roughly 5–6 lb. But your CYA sets the real target — run your own numbers in the calculator rather than trusting a bag label.
How much water does 1 lb of pool shock treat?
One pound of 65% cal-hypo in 10,000 gallons raises free chlorine about 7.8 ppm. So it 'treats' 10,000 gallons for roughly an 8 ppm rise — scale up or down from there.
How much shock for a small 3,000 gallon pool?
Scale everything down: at CYA 40, a 14 ppm shock rise in 3,000 gallons is about 5–6 cups of 12.5% liquid chlorine. Small pools punish heavy hands, so measure — don't pour.

Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.