Pool Chemical Calculator: Dose Anything, Accurately

Quick answer

Pick your chemical above, enter your pool gallons and your current → target levels, and you'll get the dose. It covers chlorine (liquid, bleach, cal-hypo), pH chemicals (muriatic acid, dry acid, soda ash), baking soda, stabilizer, calcium chloride, and salt — all from standard pool-industry dosing ratios. One calculator, eleven chemicals, zero guesswork.

Eleven chemicals, one calculator. Instead of a separate page for every product, this is the workhorse: tell it what you're adding, where your levels are, and where you want them — it hands you an exact amount.

One golden rule before you start: dose in order — alkalinity first, then pH, then chlorine/sanitizer, then calcium and CYA. If that order is new to you, read alkalinity vs pH first. It'll save you from chasing your own tail.

Pool Chemical Calculator: Dose Anything, Accurately

Pool chemical dose calculator

Add this much Liquid chlorine 12.5%:
0.36 gal (6 cups)
Pool-store liquid chlorine. 1 gal in 10,000 gal raises FC about 12.5 ppm.

Estimate from standard pool-industry dosing ratios. Add two-thirds, retest after circulation, then top up. Never mix chlorine products together. Your product label has the final say.

The dosing discipline that prevents overshoot

Add two-thirds of the calculated dose, circulate for an hour (four hours for acid/pH moves), retest, then top up. The pattern I see in forum threads is always the same: the full calculated dose of two chemicals at once, and retesting… never. Don't be that thread.

One chemical at a time. Retest between chemicals. It feels slower per session — and it's dramatically faster per week, because you're not undoing your own mistakes.

The dosing discipline that prevents overshoot

Which chemical for which job

Quick cheat sheet: raise chlorine with liquid chlorine or plain bleach. Lower pH with muriatic acid (or dry acid). Raise pH with soda ash — or just aerate if your TA is already high. Raise TA with baking soda. Raise CYA with stabilizer/conditioner. Raise calcium with calcium chloride. Raise salt with pool salt.

Now the part most people miss: what each chemical adds besides its main job. Cal-hypo adds calcium. Dichlor and trichlor add CYA. Baking soda nudges pH up a little too. These 'hidden loads' are quietly how pools drift out of balance over a season — you're fixing one number and feeding another.

Dosing ratios used here
  • Liquid chlorine 12.5%: 1 gal/10k gal ≈ +12.5 ppm FC
  • Muriatic acid 31.45%: ~16 oz/10k gal ≈ −0.2 pH
  • Baking soda: 1.5 lb/10k gal ≈ +10 ppm TA
  • Stabilizer: 1 lb/10k gal ≈ +12 ppm CYA
  • Calcium chloride: 1.25 lb/10k gal ≈ +10 ppm CH
  • Salt: 40 lb/10k gal ≈ +480 ppm
Safety warning. Never mix different chlorine products together, and never mix chlorine with acid. Wear gloves and eye protection, add chemicals to water (never water to chemicals), and follow the exact instructions on your product label — the label overrides any calculator. Store chemicals dry, separate, and away from kids and pets.
Common questions about pool chemical calculator: dose anything, accurately

Common questions

In what order do I add pool chemicals?
Alkalinity first, then pH, then chlorine, then calcium, CYA, and salt. Each step's reading depends on the one before it being right — get them out of order and you'll chase numbers all afternoon.
How long between adding different chemicals?
Give it at least 30–60 minutes of circulation between chemicals — and 4+ hours after any pH or alkalinity move before you retest. And never add chlorine and acid at the same time. Ever.
How much muriatic acid for a 20,000 gallon pool?
About 32 oz of 31.45% per 0.2 pH drop in 20,000 gallons — and that's a starting estimate, since TA shifts it. Add half (16 oz), retest in 4 hours, then adjust. Never the full calculated dose at once with acid.
Can I add all my pool chemicals at the same time?
No — one at a time, with 30–60 minutes of circulation between them, and 4+ hours after any pH or alkalinity move before retesting. Dumping everything at once is how pools end up fighting themselves.
What pool chemicals do I actually need each week?
Chlorine, constantly — that's the weekly (really daily) one. Everything else is as-needed, driven by testing: pH adjusters when pH drifts, and that's honestly most of routine care. Test-driven, not schedule-driven.

Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.