Enter your gallons and current → target TA above. The rule is dead simple: 1.5 lb of baking soda per 10,000 gallons raises total alkalinity about 10 ppm. Target TA is 80–120 ppm (60–80 for saltwater pools). Broadcast it across the surface with the pump running — that's the whole technique.
Baking soda is the cheapest, most predictable alkalinity increaser you can buy — because it literally is the pool-store 'alkalinity increaser,' just sodium bicarbonate in a grocery-store box at a fraction of the price. No shame in it. The chemistry is identical; only the marketing budget differs.
One caution: baking soda nudges pH up slightly too. If your pH is already high, fix pH first — or check the full alkalinity guide to get the sequencing right.
Estimate from standard pool-industry dosing ratios. Add two-thirds, retest after circulation, then top up. Never mix chlorine products together. Your product label has the final say.
How to add it
Broadcast the dose across the pool surface with the pump running — don't dump it in one pile. It dissolves readily, so this part's easy. Retest TA after 6+ hours of circulation. For big raises (40+ ppm), split it into two doses a day apart instead of going all in.
Baking soda vs soda ash vs "alkalinity increaser"
Here's the lineup: baking soda (sodium bicarbonate) raises TA a lot and pH a little — the right tool for low TA. Soda ash (sodium carbonate) raises pH a lot and TA moderately — the right tool for low pH. And pool-store 'alkalinity increaser'? Sodium bicarbonate in a fancy bag at 3× the price. Now you know, and you can't un-know it.
Safety warning. Never mix different chlorine products together, and never mix chlorine with acid. Wear gloves and eye protection, add chemicals to water (never water to chemicals), and follow the exact instructions on your product label — the label overrides any calculator. Store chemicals dry, separate, and away from kids and pets.
Common questions
How much baking soda for a 10,000 gallon pool?
In a 10,000-gallon pool: 1.5 lb raises TA by 10 ppm. Going from 60 to 90 ppm takes 4.5 lb — split that into two doses a day apart.
Will baking soda clear a cloudy pool?
Only if low alkalinity is what's causing the cloudiness — which is rare, honestly. Baking soda adjusts TA; it is not a clarifier, no matter what anyone at the pool store implies.
Does baking soda raise pH too?
Slightly, yes. If your pH is already at the top of its range, raise TA first and then nudge pH back down after. Order matters.
Can you put too much baking soda in a pool?
Absolutely — TA overshoots, pH drifts up with it, and high TA makes pH a nightmare to manage afterward. Dose to a number from a test, not by feel. 'A whole bag to be safe' is how 200 TA happens.
How long does baking soda take to raise alkalinity?
It dissolves fast — retest after 6+ hours of circulation. Don't stack a second dose the same day; give the first one time to fully register before you decide you need more.
Should I use baking soda to raise pH?
No — that's soda ash's job. Baking soda is for total alkalinity; using it to chase pH is exactly how TA ends up at 200 while pH barely moves. Right chemical for the right job.
Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.