How to Raise Alkalinity in a Pool (Baking Soda Dosing)

Quick answer

Grab the baking soda calculator: 1.5 lb per 10,000 gallons raises TA about 10 ppm. Broadcast it across the surface with the pump running, retest after 6+ hours. Target 80–120 ppm. And fix TA before you touch pH — order matters here.

Low alkalinity (under 60 ppm) means your pH swings wildly — the buffer’s gone. Raising TA is the easiest correction in all of pool chemistry: baking soda, broadcast, done. The only discipline is doing it before pH, not after.

How to Raise Alkalinity in a Pool (Baking Soda Dosing)

Pool chemical dose calculator

Add this much Baking soda (sodium bicarbonate):
9.00 lb
1.5 lb per 10,000 gal raises TA about 10 ppm.

Estimate from standard pool-industry dosing ratios. Add two-thirds, retest after circulation, then top up. Never mix chlorine products together. Your product label has the final say.

The method

Calculate the dose for your gallons and your TA gap. Broadcast it across the pool surface — scattered, not dumped in one pile — with the pump running. Let it circulate 6+ hours (overnight is fine), then retest. If you need to raise more than 40 ppm, split it into two doses a day apart.

Baking soda nudges pH up slightly as a side effect. If your pH was already high, don’t panic — get TA right first, then trim pH down with a small acid dose after.

The method

Symptoms of low TA

pH that won’t stay where you put it — up one day, down the next. pH crashing after every rain. In plaster pools, chronic low TA etches the surface over time. If any of that sounds familiar, test TA before you do anything else.

Common questions about how to raise alkalinity in a pool (baking soda dosing)

Common questions

How much baking soda to raise alkalinity by 20 ppm?
3 lb per 10,000 gallons (scale to your gallons). Split it into two doses if the pool is big or the gap is large.
Can I swim after adding baking soda?
Yes — once it’s dissolved and circulated, usually 30–60 minutes. It’s the gentlest chemical you’ll ever add to a pool.
How do I raise alkalinity without raising pH?
Honestly, you can’t fully separate them — baking soda always nudges pH up a bit. The practical move: get TA into range first, then trim pH back down with a small acid dose after. Order matters more than perfection.
Does shocking raise pool alkalinity?
Cal-hypo nudges it up slightly; trichlor and dichlor push it down. But shock is a terrible TA tool either way — if alkalinity is the problem, dose baking soda directly and stop hoping side effects do the job.
Is baking soda better than store-bought alkalinity increaser?
They’re the same chemical — sodium bicarbonate. The pool-store bag just costs more. Buy plain baking soda, check it’s 100% sodium bicarbonate with no fragrances, and pocket the difference.

Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.