Greyish dust that poofs into a cloud when you brush it is dead algae — the aftermath of a successful kill. Vacuum it to waste if your setup allows (or to filter, with immediate cleaning afterward), brush everything toward the drain, and hold FC at shock level until nothing new settles overnight.
You shocked, the green is gone, and now the floor is wearing grey dust that vanishes in a cloud the moment you brush it. Congratulations — that is dead algae, and it means the treatment worked. What is left is the janitorial phase, and it is straightforward.
Best option: vacuum to waste. The dead algae leaves the pool entirely instead of loading up your filter. (You will lose some water — top up afterward.) If your setup cannot vacuum to waste, vacuum to filter, then backwash or clean the filter immediately. Dead algae clogs filters fast, so do not put this off.
And go slow. Fast vacuuming just stirs the dust back into suspension and you will be chasing it for days. Slow overlapping passes, working toward the drain — boring, but it works.
Do not confuse it with a live problem
Dead algae is grey or tan and poofs into nothing when brushed. Mustard algae is yellowish and comes back after brushing. Sand is gritty and does not poof at all. Here is the rule I use: if the dust reappears daily in the same spots after vacuuming, something is still alive — keep chlorine at shock level and keep brushing.
Finish the job
Hold FC at shock level until a brushed-clean floor stays clean overnight. Run the filter 24/7 through the whole cleanup. Only when nothing has settled for a full 24 hours do you let FC drift back to normal. Quitting early just restarts the whole bloom — and then you are shocking all over again.
Safety warning. Never mix different chlorine products together, and never mix chlorine with acid. Wear gloves and eye protection, add chemicals to water (never water to chemicals), and follow the exact instructions on your product label — the label overrides any calculator. Store chemicals dry, separate, and away from kids and pets.
Common questions
How long does dead algae take to clear?
A few days of vacuuming plus filtration for a typical bloom. If it keeps reappearing, live algae is still in there — hold shock level until it stops.
Should I vacuum dead algae to waste or filter?
To waste if you can — it removes the load from the pool entirely. To filter works, but only if you backwash immediately after.
How do I get dead algae off the pool floor?
Vacuum it up slowly — fast vacuuming just stirs it back into the water. Vacuum to waste if you can; if you must vacuum through the filter, watch the pressure and backwash or clean when it climbs.
Is it okay to swim with dead algae in the pool?
Dead algae itself won't hurt you, but I'd still stay out until it's gone — you can't see the bottom clearly, and you can't be sure it's all actually dead until chlorine holds overnight. Clear first, swim second.
Will dead algae grow back?
Dead algae doesn't come back to life — but if your chlorine drops again, new algae absolutely will, and it'll look like the same problem returning. Hold your FC for your CYA and the floor stays clean.
Will clarifier remove dead algae?
Clarifier helps your filter grab the fine stuff, but it's a helper, not the fix — vacuuming is what actually removes dead algae from the pool. Use clarifier after vacuuming for the haze that's left, not instead of it.
Last reviewed: September 29, 2026. Dosing figures are estimates from standard pool-industry ratios — always confirm against your product label and a reliable test kit.