Salt Pool Maintenance Schedule: Daily, Weekly, Monthly
Weekly: check FC and pH, adjust output or acid. Monthly: full panel (TA, CH, CYA, salt), inspect the cell, clean it if scaled. Seasonally: top up salt, deep-clean the cell, check stabilizer. Daily: nothing — and that nothing is the entire point of salt.
Saltwater pools earn their low-maintenance reputation — but "low" is not "none," no matter what the brochure implied. This is the schedule that keeps a salt pool boring all season, and boring is the goal. Print it out and tape it inside the equipment lid; future-you will be grateful.

Weekly (10 minutes)
Test FC and pH. If FC drifted, nudge the output dial; if pH climbed (it did — see why salt pool pH rises), add acid. Skim, empty the baskets — the unglamorous stuff that prevents the glamorous problems. I'm not exaggerating when I say this ten-minute habit is most of salt pool ownership.
Monthly (30 minutes)
Run the full panel: TA, calcium hardness, CYA, and salt — tested independently, not just the unit's display reading (which drifts as cells age). Inspect the cell for scale and clean it if needed. Check stabilizer specifically: salt pools want CYA 70–80, and splash-out plus rain dilute it silently over the season. Glance at the flow switch and clear any error codes while you're there.

Seasonal
Opening: test everything, top up salt and CYA, inspect and clean the cell, verify output is actually producing. Mid-season: salt top-up after those heavy-rain stretches that dilute everything. Closing (cold climates): balance the water, lower the level per your winterizing method, and protect the cell per the manufacturer's instructions — a lot of owners just remove it and store it indoors for winter, which is the kindest thing you can do for it.
- Weekly: FC + pH, adjust dial/acid. (~10 min)
- Monthly: TA, CH, CYA, salt + cell inspection. (~30 min)
- Seasonal: salt/CYA top-ups, cell deep-clean.
- CYA target 70–80; TA 60–80; salt per manual (usually 3000–3500).
